The design of a flexible uniplanar AMC is presented. A prototype is manufactured and characterized based on reflection coe±cient phase under flat and bent conditions. The designed prototype shows broad AMC operation bandwidth and polarization angle independency in both flat and bent situations. Its angular margin when operating under oblique incidence is also tested. FEM simulations and measurements in an anechoic chamber are presented.
2. Yang, F. R., K. P. Ma, Y. Qian, and T. Itoh, "A uniplanar compact photonic-bandgap (UC-PBG) structure and its applications for microwave circuit," IEEE Trans. Microwave Theory Tech., Vol. 47, No. 8, 1509-1514, 1999.
doi:10.1109/22.780402
3. Yang, F. and Y. Rahmat-Samii, "Electromagnetic band-gap structures in antenna engineering," The Cambridge RF and Microwave Engineering Series, Cambridge University Press, 2008.
4. McVay, J., N. Engheta, and A. Hoofar, "High impedance metamaterials surfaces using Hilbert-curve inclusions," IEEE Microw. Wire. Comp. Lett., Vol. 14, No. 3, 130-132, 2004.
doi:10.1109/LMWC.2003.822571
5. Kim, Y., F. Yang, and A. Z. Elsherbeni, "Compact artificial magnetic conductor design using planar square spiral geometries," Progress In Electromagnetics Research, Vol. 77, 43-54, 2007.
doi:10.2528/PIER07072302
6. De Cos, M. E., F. Las-Heras, and M. Franco, "Design of planar artificial magnetic conductor ground plane using frequency-selective surfaces for frequencies below 1 GHz," IEEE Antennas and Wireless Propagation Letters, Vol. 8, 951-954, 2009.
doi:10.1109/LAWP.2009.2029133
7. De Cos, M. E., Y. Alvarez, and F. Las-Heras, "Planar artificial magnetic conductor: Design and characterization setup in the RFID SHF band," Journal of Electromagnetic Waves and Applications, Vol. 23, No. 11-12, 1467-1478, 2009.
doi:10.1163/156939309789476248
8. Kern, D. J., D. H. Werner, A. Monorchio, L. Lanuza, and M. J. Wilhelm, "The design synthesis of multiband artificial magnetic conductors using high impedance frequency selective surfaces," IEEE Trans. on Antennas and Propag., Vol. 53, No. 1, Jan. 2005.
doi:10.1109/TAP.2004.840540
9. De Cos, M. E., Y. Alvarez, R. C. Hadarig, and F. Las-Heras, "Novel SHF band uniplanar Artificial Magnetic Conductor," IEEE Antennas and Wireless Propagation Letters, Vol. 9, 44-47, 2010.
doi:10.1109/LAWP.2010.2041890
10. Luukkonen, O., C. R. Simovski, and S. A. Tretyakov, "Grounded uniaxial material slabs as magnetic conductors," Progress In Electromagnetics Research B, Vol. 15, 267-283, 2009.
doi:10.2528/PIERB09050702
11. Zhu, S. and R. Langley, "Dual-band wearable textile antenna on an EBG substrate," IEEE Trans. on Antennas and Propag., Vol. 57, No. 4, Apr. 2009.
doi:10.1109/TAP.2009.2014527
12. Salonen, P. and Y. Rahmat-Samii, "Textile antennas: Effects of antenna bending on input matching and impedance bandwidth," IEEE Aerospace Electronic Systems Magazine, Vol. 22, No. 3, 10-14, 2007.
doi:10.1109/MAES.2007.340501
13. Salonen, P., M. Keskilammi, and L. Sydanheimo, "A low-cost 2.45 GHz photonic band-gap patch antenna for wearable systems," Proc. 11th Int. Conf. Antennas and Propagation, 719-724, Apr. 17-20, 2001.
14. Salonen, P. and Y. Rahmat-Samii, "WEBGA-wearable electromagnetic band-gap antenna," IEEE APS Int. Symp. Dig., Vol. 1, 451-454, Monterrey, CA, Jun. 2004.
15. Monorchio, A., G. Manara, and L. Lanuzza, "Synthesis of artificial magnetic conductors by usisng multilayered frequency selective surfaces," IEEE Ant. Wireless Propag. Lett., Vol. 1, 196-199, 2002.
doi:10.1109/LAWP.2002.807956
16. Xie, H.-H., Y.-C. Jiao, K. Song, and Z. Zhang, "A novel multi-band electromagnetic band-gap structure," Progress In Electromagnetics Research Letters, Vol. 9, 67-74, 2009.
doi:10.2528/PIERL09042302
17. Srivastava, R., K. B. Thapa, S. Pati, and S. P. Ojha, "Omni-direction reflection in one dimensional photonic crystal," Progress In Electromagnetics Research B, Vol. 7, 133-143, 2008.
doi:10.2528/PIERB08020601
18. Ekmekci, E. and G. Turhan-Sayan, "Comparative investigation of resonance characteristics and electrical size of the double-sided Srr, Bc-Srr and conventional srr type metamaterials for varying substrate parameters," Progress In Electromagnetics Research B, Vol. 12, 35-62, 2009.
doi:10.2528/PIERB08120405
19. Pajewski, L., L. Rinaldi, and G. Schettini, "Enhancement of directivity using 2D-electromagnetic crystals near the band-gap edge: A full-wave approach," Progress In Electromagnetics Research, Vol. 80, 179-196, 2008.
doi:10.2528/PIER07111504
20. Yang, F. and Y. Rahmat-Samii, "Reflection phase characterizations of the EBG ground plane for low profile wire antenna applications," IEEE Trans. on Antennas and Propag., Vol. 51, No. 10, 2691-2701, 2003.
doi:10.1109/TAP.2003.817559
21. McVay, J., A. Hoofar, and N. Engheta, "Small dipole-antenna near Peano high-impedance surfaces," IEEE AP-S Int. Symp., Vol. 1, 305-308, 2004.
22. Mosallaei, H. and K. Sarabandi, "Antenna miniaturization and bandwidth enhancement using a reactive impedance substrate," IEEE Trans. on Antennas and Propag., Vol. 52, No. 9, Sep. 2004.
doi:10.1109/TAP.2004.834135
23. Akhoondzadeh-Asl, L., D. J. Kern, P. Hall, and D. Werner, "Wideband dipoles on electromagnetic bandgap ground planes," IEEE Trans. on Antennas and Propag., Vol. 55, No. 9, Sep. 2007.
doi:10.1109/TAP.2007.904071
24. Liang, J. and H.-Y. D. Yang, "Radiation characteristics of a microstrip patch over an electromagnetic bandgap surface," IEEE Trans. on Antennas and Propag., Vol. 55, No. 6, Jun. 2007.
25. Feresidis, A. P., G. Goussetis, S. Wang, and J. C. Vardaxoglou, "Artifiial magnetic conductor surfaces and their application to low profile highgain planar antennas," IEEE Trans. on Antennas and Propag., Vol. 53, No. 1, 209-215, Jan. 2005.
doi:10.1109/TAP.2004.840528
26. Sohn, J. R., K. Y. Kim, and H.-S. Tae, "Comparative study on various artificial magnetic conductors for low-profile antenna," Progress In Electromagnetics Research, Vol. 61, 27-37, 2006.
doi:10.2528/PIER06011701
27. Yang, F. and Y. Rahmat Samii, "Reflection phase characterizations of the EBG ground plane for low profile wire antenna," Progress In Electromagnetics Research, Vol. 77, 2007.
28. Shaban, H., H. Elmikaty, and A. A. Shaalan, "Study the effects of electromagnetic band-gap (EBG) substrate on two patch microstrip antenna," Progress In Electromagnetics Research B, Vol. 10, 55-74, 2008.
doi:10.2528/PIERB08081901
29. Hosseini, M. and S. Bashir, "A novel circularly polarized antenna based on an artificial ground plane," Progress In Electromagnetics Research Letters, Vol. 5, 13-22, 2008.
doi:10.2528/PIERL08102004
30. Pirhadi, A., F. Keshmiri, M. Hakkak, and M. Tayarani, "Analysis and design of dual band high directive EBG resonator antenna using square loop FSS as superstrate layer," Progress In Electromagnetics Research, Vol. 70, 1-20, 2007.
doi:10.2528/PIER07010201
31. Rajo-Iglesias, E., L. Inclan-Sanchez, and O. Quevedo-Teruel, "Back radiation reduction in patch antennas using planar soft surfaces," Progress In Electromagnetics Research Letters, Vol. 6, 123-130, 2009.
doi:10.2528/PIERL08111202
32. Yuan, H.-W., S.-X. Gong, X.Wang, and W.-T.Wang, "Scattering analysis of a printed dipole antenna using PBG structures," Progress In Electromagnetics Research B, Vol. 1, 189-195, 2008.
doi:10.2528/PIERB07102302
33. Duan, Z., S. Qu, and Y. Hou, "Electrically small antenna inspired by spired split ring resonator," Progress In Electromagnetics Research Letters, Vol. 7, 47-57, 2009.
doi:10.2528/PIERL09012005
34. Moghadasi, S. M., A. R. Attari, and M. M. Mirsalehi, "Compact and wideband 1-D mushroom-like EBG filters," Progress In Electromagnetics Research, Vol. 83, 323-333, 2008.
doi:10.2528/PIER08050101
35. Srivastava, R., K. B. Thapa, S. Pati, and S. P. Ojha, "Design of photonic band gap filter," Progress In Electromagnetics Research, Vol. 81, 225-235, 2008.
doi:10.2528/PIER08010902
36. Fallahzadeh, S., H. Bahrami, and M. Tayarani, "A novel dual-band bandstop waveguide filter using split ring resonators," Progress In Electromagnetics Research Letters, Vol. 12, 133-139, 2009.
doi:10.2528/PIERL09103103
37. Awasthi, S. K., U. Malaviya, S. P. Ojha, N. K. Mishra, and B. Singh, "Design of a tunable polarizer using a one-dimensional nano sized photonic bandgap structure," Progress In Electromagnetics Research B, Vol. 5, 133-152, 2008.
doi:10.2528/PIERB08021004
38. Hu, X., Q. Zhang, and S. He, "Compact dual-band rejection filter based on complementary meander line split ring resonator," Progress In Electromagnetics Research Letters, Vol. 8, 181-190, 2009.
doi:10.2528/PIERL08110801
39. Liu, J.-C., H.-C. Lin, and B.-H. Zeng, "Complementary split ring resonators with dual mesh-shaped couplings and defected ground structures for wide pass-band and stop- band BPF design," Progress In Electromagnetics Research Letters, Vol. 10, 19-28, 2009.
40. Karthikeyan, S. S. and R. S. Kshetrimayum, "Compact wideband bandpass filter using open slot split ring resonator and CMRC," Progress In Electromagnetics Research Letters, Vol. 10, 39-48, 2009.
doi:10.2528/PIERL09061602
41. Hsu, H., M. J. Hill, R. W. Ziolkowski, and J. Papapolymerou, "A duroid-based planar EBG cavity resonator filter with improved quality factor," IEEE Antennas and Propag. Letters, Vol. 1, 67-70, 2002.
doi:10.1109/LAWP.2002.802548
42. Engheta, N., "Thin absorbing screens using metamaterial surfaces," IEEE Antennas and Propag. Society International Symp., Vol. 2, 392-395, Jun. 16-21, 2002.
43. Zheng, Q.-R., Y.-M. Yan, X.-Y. Cao, and N.-C. Yuan, "High impedance ground plane (Higp) incorporated with resistance for radar cross section (RCS) reduction of antenna," Progress In Electromagnetics Research, Vol. 84, 307-319, 2008.
doi:10.2528/PIER08072003
44. Belaid, M. and K. Wu, "Spatial power amplifier using a passive active TEM waveguide concept," IEEE Trans. Microwave Theory and Tech., Vol. 51, No. 3, 684-689, Mar. 2003.
doi:10.1109/TMTT.2003.808698
45. Li, Y. D., et al., "Prototyping dual-band artificial magnetic conductors with laser micromachining," Proc. of WARS Conference, Leura, NSW, Australia, Feb. 2006.
Submit
