Vol. 139

Latest Volume
All Volumes
All Issues
2013-04-24

Modeling and Analysis of Conducted Electromagnetic Interference in Electric Vehicle Power Supply System

By Yanjie Guo, Lifang Wang, and Chenglin Liao
Progress In Electromagnetics Research, Vol. 139, 193-209, 2013
doi:10.2528/PIER13031101

Abstract

Electromagnetic interference (EMI) of the power supply system in electric vehicles will seriously affect the safety of the vehicle and passengers' health. So a model of power supply system is presented to analyze its conducted EMI in the paper. This model shows the effects of paralleled interleaving DC/DC converter, which contains the new circular current EMI characteristics. Also, a novel power battery model is established considering both the energy dynamic processes and the high frequency features. Firstly, the power electronics devices are studied as the most important part of the DC/DC converter. Then, the equivalent model of the paralleled interleaving DC/DC converter is set up to express the interference source features. Also, the power battery, which is the main energy storage equipment in electric vehicles, is modeled as EMI propagation paths. Furthermore, loads of the power supply system, such as lead acid battery and low voltage devices, are investigated to evaluate their immunity. Finally, the system model is established. The system EMI is analyzed to get their generating causes, time domain and frequency domain characteristics based on both simulations and experiments.

Citation


Yanjie Guo, Lifang Wang, and Chenglin Liao, "Modeling and Analysis of Conducted Electromagnetic Interference in Electric Vehicle Power Supply System," Progress In Electromagnetics Research, Vol. 139, 193-209, 2013.
doi:10.2528/PIER13031101
http://test.jpier.org/PIER/pier.php?paper=13031101

References


    1. Mahmoudi, A., N. Rahim, and H. Ping, "Axial-flux permanent-magnet motor design for electric vehicle direct drive using sizing equation and finite element analysis," Progress In Electromagnetics Research, Vol. 122, 467-469, 2012.
    doi:10.2528/PIER11090402

    2. Lei, J.-Z., et al., "EMC analysis of antennas mounted on electricity large platforms with parallel FDTD methods," Progress In Electromagnetics Research, Vol. 84, 205-220, 2008.
    doi:10.2528/PIER08071303

    3. Ala, G., et al., "Evaluation of radiated EMI in 42-V vehicle electrical systems by FDTD simulation," IEEE Trans. on Vehicular Technology, Vol. 56, No. 4, 1477-1484, July 2007.
    doi:10.1109/TVT.2007.896964

    4. Lecointe, J.-P., B. Cassoret, and J. Brudny, "Distinction of toothing and saturation effects on magnetic noise of induction motors," Progress In Electromagnetics Research, Vol. 112, 125-137, 2011.

    5. Jian, L. and K. T. Chau, "Design and analysis of a magnetic-geared electronic-continuously variable transmission system using finite element method," Progress In Electromagnetics Research, Vol. 107, 47-61, 2010.
    doi:10.2528/PIER10062806

    6. Revol, B., et al., "EMI study of three-phase inverter-fed motor drives," IEEE Trans. on Industry Applications, Vol. 47, No. 1, 223-231, January/February 2011.
    doi:10.1109/TIA.2010.2091193

    7. Akagi, H. and T. Doumoto, "An approach to eliminating high-frequency shaft voltage and ground leakage current from an inverter-driven motor," IEEE Trans. on Industry Applications, Vol. 40, No. 4, 1162-1169, July/August 2004.
    doi:10.1109/TIA.2004.830748

    8. Guttowski, S., et al., "EMC issues in cars with electric drives," IEEE International Symposium on Electromagnetic Compatibility, 777-782, Boston, USA, 2003.

    9. Chen, S., et al., "Towards EMI prediction of a PM motor drive for automotive applications," Applied Power Electronics Conference and Exposition, 14-22, Miami, USA, 2003.

    10. Labrousse, D., B. Revol, and F. Costa, "Common-mode modeling of the association of N-switching cells: Application to an electric-vehicle-drive system ," IEEE Trans. on Power Electronics, Vol. 24, No. 11, 2852-2859, November 2010.

    11. Li, W., et al., "High frequency conducted disturbance analysis of driving system in fuel cell vehicle," The 4th Asia-Pacific Conference on Environmental Electromagnetics, 724-727, Dalian, China, 2006.

    12. Lee, Y. H. and A. Nasiri, "Analysis and modeling of conductive EMI noise of power electronics converters in electric and hybrid electric vehicles," Applied Power Electronics Conference and Exposition, 1952-1957, Austin, USA, 2008.

    13. Chen, M. and G. A. Rincon-Mora, "Accurate electrical battery model capable of predicting runtime and I-V performance," IEEE Trans. on Energy Conversion, Vol. 21, No. 2, 504-511, June 2006.
    doi:10.1109/TEC.2006.874229

    14. Gao, L., S. Liu, and R. A. Dougal, "Dynamic Lithium-ion battery model for system simulation," IEEE Trans. on Components and Packaging Technologies, Vol. 25, No. 3, 495-505, September 2002.
    doi:10.1109/TCAPT.2002.803653

    15. Hoene, E., et al., "RF-properties of automotive traction batteries," IEEE International Symposium on Electromagnetic Compatibility, EMC'03, 425-428, Istanbul, Turkey, 2003.

    16. Meng, J. and W. M. Ma, "Power converter EMI analysis including IGBT nonlinear switching transient model," IEEE Trans. on Industrial Electronics, Vol. 53, No. 5, 1577-1588, October 2004.

    17. Musumeci, S., et al., "Switching-behavior improvement of insulated gate-controlled devices," IEEE Trans. on Power Electronics, Vol. 12, No. 4, 645-653, July 1997.
    doi:10.1109/63.602559

    18. Guo, Y. J., L. F. Wang, and C. L. Liao, "Systematic analysis of conducted electromagnetic interferences for the electric drive system in electric vehicles," Progress In Electromagnetics Research, Vol. 134, 359-378, 2013.

    19. Liang, J., et al., "Analysis of electromagnetic behavior in switched reluctance motor for the application of integrated air conditioner on-board charger system," Progress In Electromagnetics Research, Vol. 124, 347-364, 2012.
    doi:10.2528/PIER11112501

    20. Zhang, D., et al., "DC-link ripple current reduction for paralleled three-phase voltage-source converters with interleaving," IEEE Trans. on Power Electronics, Vol. 26, No. 6, 1741-1753, June 2011.
    doi:10.1109/TPEL.2010.2082002

    21. Abu-Sharkh, S. and D. Doer®el, "Rapid test and non-linear model characteristsation of solid-state Lithium-ion batteries," Journal of Power Sources, Vol. 130, 266-274, May 2004.
    doi:10.1016/j.jpowsour.2003.12.001

    22. Hunt, G., "Freedom CAR battery test manual for power-assist hybrid electric vehicles,", DOI/ID-11069, INEEL, October 2003.

    23. Thelea, M., et al., "Hybrid modeling of lead-acid batteries in frequency and time domain," Journal of Power Sources, Vol. 144, 461-466, June 2005.
    doi:10.1016/j.jpowsour.2004.11.009

    24. Dai, H. F., et al., "Online cell SOC estimation of li-ion battery packs using a dual time-scale Kalman filtering for EV applications," Applied Energy, Vol. 95, 227-237, July 2012.