Vol. 46

Latest Volume
All Volumes
All Issues
2013-12-11

A Novel UHF RFID Slot Coupled Metallic Tag Antenna for Steel-Bar Applications

By Jung Lee, Heon Kook Kweon, and Kwang Chun Lee
Progress In Electromagnetics Research C, Vol. 46, 13-22, 2014
doi:10.2528/PIERC13101101

Abstract

In this paper, we propose a novel UHF RFID coupled slot metallic tag antenna with a radome. The proposed tag antenna consists of a frequency tuning slot, imaginary part tuning slot, real part tuning stub, micro-chip, and radome. All simulations were carried out using an Ansys HFSS simulator. The RFID tag antenna was designed and fabricated for use in the Korean and Japanese UHF band of 916.7 to 923.5 MHz. The measured 3 dB frequency bandwidth is 914 to 926 MHz. The measured read range is 12 m on a metallic surface. Details of the proposed tag antenna design, as well as simulated and measured results are presented and discussed.

Citation


Jung Lee, Heon Kook Kweon, and Kwang Chun Lee, "A Novel UHF RFID Slot Coupled Metallic Tag Antenna for Steel-Bar Applications," Progress In Electromagnetics Research C, Vol. 46, 13-22, 2014.
doi:10.2528/PIERC13101101
http://test.jpier.org/PIERC/pier.php?paper=13101101

References


    1. Kim, J. D., et al., "Value analysis of location enabled radio-frequency identification information on delivery chain performance," International Journal of Production Economics, Vol. 112, No. 1, 403-415, 2008.
    doi:10.1016/j.ijpe.2007.04.006

    2. Kovavisaruch, L. O., P. Lertudomtana, and S. Horungruang, "Management truck tire information in logistic industry using RFID technology," Portland International Center for Management of Engineering and Technology, Technology Management for a Sustainable Economy , 1656-1665, 2008.

    3. Wang, S. J., S. F. Liu, and W. L. Wang, "The simulated impact of RFID enabled supply chain on pull-based inventory replenishment in TFT-LCD industry," International Journal of Production Economics, Vol. 112, No. 2, 570-586, 2008.
    doi:10.1016/j.ijpe.2007.05.002

    4. Ke, X., et al., "Establishment of containers management system based on RFID technology," International Conference on Computer Science and Software Engineering, Vol. 6, 329-331, 2008.

    5. Lee, J. N., et al., "Design of an ultra-compact UHF passive RFID tag antenna for a medical sample tube," ETRI Journal, Vol. 34, No. 6, 974-977, 2012.
    doi:10.4218/etrij.12.0212.0161

    6. Rahman, M. S., Y. G. Park, and K. D. Kim, "Relative location estimation of vehicles in parking management system," International Conference on Advanced Communication Technology, Vol. 3, 729-732, 2009.

    7. Ali, K. and H. Hassanein, "Passive RFID for intelligent transportation systems," IEEE Consumer Communications and Networking Conference, 1-2, 2009.

    8. Son, H. W., G. Y. Choi, and C. S. Pyo, "Design of wideband RFID tag antenna for metallic surfaces ," Electronics Letters, Vol. 42, No. 5, 263-265, 2006.
    doi:10.1049/el:20064323

    9. Son, H. W. and G. Y. Choi, "Orthogonally proximity-coupled patch antenna for a passive RFID tag on metallic surfaces ," Microwave and Optical Technology Letters, Vol. 49, No. 3, 715-717, 2007.
    doi:10.1002/mop.22222

    10. Son, H. W., "Design of RFID tag antenna for metallic surfaces using lossy substrate," Electronics Letters, Vol. 44, No. 12, 711-713, 2008.
    doi:10.1049/el:20081141

    11. Lin, D.-B., I.-T. Tang, and C.-C. Wang, "UHF RFID H-shaped tag antenna using microstrip feed design on metallic objects," Journal of Electromagnetic Waves and Applications, Vol. 25, No. 13, 1828-1839, 2011.
    doi:10.1163/156939311797454024

    12. Lin, D.-B., C.-C. Wang, J.-H. Chou, and I.-T. Tang, "Novel UHF RFID loop antenna with interdigital coupled section on metallic objects," Journal of Electromagnetic Waves and Applications, Vol. 26, No. 2--3, , 366-378, 2012.
    doi:10.1163/156939312800030802

    13. Viani, F., M. Salucci, F. Robol, G. Oliveri, and A. Massa, "Design of a UHF RFID/GPS fractal antenna for logistics management," Journal of Electromagnetic Waves and Applications, Vol. 26, No. 4, 480-492, 2012.
    doi:10.1163/156939312800030640

    14. Chen, S.-L., S.-K. Kuo, and C.-T. Lin, "A metallic RFID tag design for steel-bar and wire-rod management application in the steel industry," Progress In Electromagnetics Research, Vol. 91, 195-212, 2009.
    doi:10.2528/PIER09021304

    15. Kim, J.-S., W.-K. Choi, and G.-Y. Choi, "Small proximity coupled ceramic patch antenna for UHF RFID tag mountable on metallic objects," Progress In Electromagnetics Research C, Vol. 4, 129-138, 2008.

    16. Kim, J. W., et al., "Effects of a metal plane on a meandered slot antenna for UHF RFID applications," Journal of Electromagnetic Engineering and Science, Vol. 12, No. 2, 176-184, 2012.
    doi:10.5515/JKIEES.2012.12.2.176

    17. Liu, Y., K.-M. Luk, and H.-C. Yin, "A RFID tag metal antenna on a compact his substrate," Progress In Electromagnetics Research Letters, Vol. 18, 51-59, 2010.
    doi:10.2528/PIERL10070601

    18. Ansoft, "High frequency structure simulator," HFSS Ver. 10, 2005.

    19. Choi, W. K., et al., "RFID tag antenna coupled by shorted microstrip line for metallic surfaces," ETRI Journal, Vol. 30, No. 4, 597-599, 2008.
    doi:10.4218/etrij.08.0208.0063

    20. Nikitin, P. V., et al., "Sensitivity and impedance measurements of UHF RFID chips," IEEE Transactions on Microwave Theory and Techniques, Vol. 57, No. 5, 1297-1302, 2009.
    doi:10.1109/TMTT.2009.2017297

    21. Shepard, S., RFID: Radio Frequency Identification, McGraw-Hill, New York, 2005.