Vol. 46

Latest Volume
All Volumes
All Issues
2014-01-22

Miniaturization of Trans-Directional Coupled Line Couplers Using Series Inductors

By Hongmei Liu, Shao-Jun Fang, Zhongbao Wang, and Yun Zhou
Progress In Electromagnetics Research C, Vol. 46, 171-177, 2014
doi:10.2528/PIERC13122201

Abstract

A miniaturized trans-directional (TRD) coupled line coupler comprises series inductors and capacitor loaded coupled lines is proposed in the paper. Series inductors are added to the periodically loaded coupled lines for further miniaturization of volume. A novel equivalent circuit is presented and theoretically analyzed. Test circuits for the miniaturized and conventional 3-dB TRD couplers were designed to operate at 1.6 GHz and fabricated using printed circuit board (PCB) technology. Samples have been measured, and comparisons in terms of volume, schematic simulation results and measurement results between the miniaturized and conventional 3-dB TRD couplers have been made to validate the proposed structure. Results show that the proposed miniaturized TRD coupler achieves a size reduction of 47.6% compared to the conventional TRD coupler with similar performances.

Citation


Hongmei Liu, Shao-Jun Fang, Zhongbao Wang, and Yun Zhou, "Miniaturization of Trans-Directional Coupled Line Couplers Using Series Inductors," Progress In Electromagnetics Research C, Vol. 46, 171-177, 2014.
doi:10.2528/PIERC13122201
http://test.jpier.org/PIERC/pier.php?paper=13122201

References


    1. Liu, , G.-Q., L.-S. Wu, and W.-Y. Yin, "A compact microstrip rat-race coupler with modified Lange and T-shaped arms," Progress In Electromagnetics Research, Vol. 115, 509-523, 2011.

    2. Pelaez-Perez, A. M., P. Almorox-Gonzalez, J. I. Alonso, and J. Gonzalez-Martin, "Ultra-broadband directional couplers using microstrip with dielectric overlay in millimeter-wave band," Progress In Electromagnetics Research, Vol. 117, 495-509, 2011.

    3. Li, B. and W. Wu, "Compact dual-band branch-line coupler with 20:1 power dividing ratio," Journal of Electromagnetic Waves and Applications, Vol. 25, No. 4, 607-615, 2011.
    doi:10.1163/156939311794500322

    4. Piatnitsa, V., D. Kholodnyak, I. Fischuk, M. Komulainen, H. Jantunen, and I. Vendik, "Miniature 90o and 180o directional couplers for bluetooth and WLAN applications designed as multilayer microwave integrated circuits," Journal of Electromagnetic Waves and Applications, Vol. 25, No. 2--3, 169-175, 2011.
    doi:10.1163/156939311794362911

    5. Malo Gomez, I., J. D. Gallego-Puyol, C. Diez Gonzalez, I. Lopez Fernandez, and C. Briso Rodrguez, "Cryogenic hybrid coupler for ultra-low-noise radio astronomy balanced amplifiers," IEEE Trans. Microw. Theory Tech., Vol. 57, No. 12, 3239-3245, 2009.
    doi:10.1109/TMTT.2009.2033874

    6. Wei, W.-B., Q.-Z. Liu, Y.-Z. Yin, and H.-J. Zhou, "Reconfigurable microstrip patch antenna with switchable polarization," Progress In Electromagnetics Research, Vol. 75, 63-68, 2007.
    doi:10.2528/PIER07053002

    7. Antonino-Daviu, E., M. Cabedo-Fabres, B. Bernardo-Clemente, and M. Ferrando-Bataller, "Printed multimode antenna for MIMO systems," Journal of Electromagnetic Waves and Applications, Vol. 25, No. 14-15, 2022-2032, 2011.
    doi:10.1163/156939311798072162

    8. Fathelbab, W. M., "Synthesis of cul-de-sac filter networks utilizing hybrid couplers," IEEE Microwave Compon. Lett., Vol. 17, No. 5, 334-336, 2007.
    doi:10.1109/LMWC.2007.895696

    9. Shie, C.-I., J.-C. Cheng, S.-C. Chou, and Y.-C. Chiang, "Transdirectional coupled-line couplers implemented by periodical shunt capacitors," IEEE Trans. Microw. Theory Tech., Vol. 57, No. 12, 2981-2988, 2009.
    doi:10.1109/TMTT.2009.2034219

    10. Shie, C.-I., J.-C. Cheng, S.-C. Chou, and Y.-C. Chiang, "Design of CMOS quadrature VCO using on-chip trans-directional couplers," Progress In Electromagnetics Research, Vol. 106, 91-106, 2010.
    doi:10.2528/PIER10053002

    11. Shie, C.-I., J.-C. Cheng, S.-C. Chou, and Y.-C. Chiang, "Design of a new type planar balun by using trans-directional couplers," IEEE Trans. Microw. Theory Tech., Vol. 60, No. 3, 471-476, 2012.
    doi:10.1109/TMTT.2011.2176139

    12. Vogel, R. W., "Analysis and design of lumped- and lumped-distributed element directional couplers for MIC and MMIC applications," IEEE Trans. Microw. Theory Tech., Vol. 40, No. 2, 253-262, 1992.
    doi:10.1109/22.120097

    13. Bona, M., L. Manholm, and J.-P. Starski, "Low-loss compact butler matrix for a microstrip antenna," IEEE Trans. Microw. Theory Tech., Vol. 50, No. 9, 2069-2075, 2002.
    doi:10.1109/TMTT.2002.802318

    14. Phromloungsri, R., M. Chongcheawchamnan, and I. D. Robertson, "Inductively compensated parallel coupled microstrip lines and their applications," IEEE Trans. Microw. Theory Tech., Vol. 54, No. 9, 3571-3581, 2006.
    doi:10.1109/TMTT.2006.881026

    15. Lee, S. and Y. Lee, "A design method for microstrip directional couplers loaded with shunt inductors for directivity enhancement," IEEE Trans. Microw. Theory Tech., Vol. 58, No. 4, 994-1002, 2010.
    doi:10.1109/TMTT.2010.2042544

    16. Collin, R. E., Foundations for Microwave Engineering, 2nd Ed., McGraw-Hill, New York, 1992.