Utilization of electromagnetic band-gap (EBG) structures is becoming attractive in the electromagnetic and antenna community. In this paper, the effects of a two-dimensional electromagnetic bandgap (EBG) Structures on the performance of microstrip patch antenna arrays are investigated using the Ansoft High Frequency Selective Simulator (HFSSTM). A mushroom-like EBG structure is compared with 2-DEBG Structures. HFSSTM is employed to determine the effects of different Structures on two element microstrip patch antennas array. Two element microstrip patch antenna array on a uniform substrate suffer from strong mutual coupling due to the pronounced surface waves. Therefore, diverse forms of 2-DEBG Structures like: little number of holes, large number of holes, defect mode and different number of mushroom-patches columns structure are discussed. The two element microstrip patch antennas array placed on a defect in the electromagnetic (EBG) substrate that localizes the energy under the antennas. The excitation frequency of the two element microstrip patch antennas array near the resonance frequency of the defect mode can be used to control the coupling between antennas that are placed in an array. The mutual coupling improved by using large number of mushroom-patches columns structure.
2. Parker, G. and M. Charlton, "Photonic crystals," Physics World, Vol. 13, 29-34, Aug. 2000.
3. Joannopoulos, J. D., R. D. Meade, and J. Winn, Photonic Crystals: Molding the Flow of Light , Princeton University Press, Princeton, N.J., 1995.
4. Yang, F. and Y. Rahmat-Samii, "Step-like structure and EBG structure to improve the performance of patch antennas on high dielectric substrate," Proc. IEEE AP-S Dig., Vol. 2, 482-485, July 2001.
5. Gonzalo, R., P. Maagt, and M. Sorolla, "Enhanced patch-antenna performance by suppressing surface waves using photonic-bandgap substrates," IEEE Trans. Microwave Theory Tech., Vol. 47, 2131-2138, Nov. 1999.
doi:10.1109/22.798009
6. Radisic, V., Y. X. Qian, R. Coccioli, and T. Itoh, "Novel 2-D photonic bandgap structure for microstrip lines," IEEE Microwave and Guided Wave Letters, Vol. 8, 69-71, 1998.
doi:10.1109/75.658644
7. Rumsey, I., M. Piket May, and P. K. Kelly, "Photonic bandgap structures used as filters in microstrip circuits," IEEE Microwave and Guided Wave Letters, Vol. 8, 336-338, 1998.
doi:10.1109/75.735413
8. Agi, K., L. D. Moreland, E. Schamiloglu, M. Mojahedi, K. J. Malloy, and E. R. Brown, "Photonic crystals: A new quasi-optical component for high-power microwaves," IEEE Transactions on Plasma Science, Vol. 24, 1067-1071, 1996.
doi:10.1109/27.533114
9. Yang, H. Y. D., N. G. Alexopoulos, and E. Yablonovitch, "Photonic band-gap materials for high-gain printed circuit antennas," IEEE Transactions on Antennas and Propagation, Vol. 45, 185-187, 1997.
doi:10.1109/8.554261
10. Sievenpiper, D., L. Zhang, R. F. J. Broas, N. G. Alexopolus, and E. Yablonovitch, "High-impedance electromagnetic surfaces with a forbidden frequency band," IEEE Trans. Microwave Theory Tech., Vol. 47, 2059-2074, Nov. 1999.
doi:10.1109/22.798001
11. Yang, F. and Y. Rahmat Sami, "The effects of an electromagnetic bandgap (EBG) structure on two element microstrip patch antenna array," IEEE Transactions Antennas and Propagation, Vol. 51, No. 10, 2936-2946, Oct. 2003.
doi:10.1109/TAP.2003.817983
12. Sievenpiper, D. F., "High-impedance electromagnetic surfaces ,", Ph.D. dissertation, UCLA, 1999.
13. Chang, C., Y. Qian, and T. Itoh, "Analysis and applications of uniplanar compact photonic bandgap structures," Progress In Electromagnetic Research, Vol. 41, 211-235, 2003.
14. Xu, H. J., Y. H. Zhang, and Y. Fan, "Analysis of the connection between K connector and microstrip with electromagnetic bandgap (EBC) structures," Progress In Electromagnetic Research, Vol. 73, 239-247, 2007.
doi:10.2528/PIER07040801
15. Pirhadi, A., M. Hakkak, and F. Keshmiri, "Using electromagnetic bandgap superstrate to enhance the bandwidth of probe FED microstrip antenna," Progress In Electromagnetic Research, Vol. 61, 215-230, 2006.
doi:10.2528/PIER06021801