novel tapered slot antenna (TSA) with 3.5/5.5 GHz dual band-notched characteristics for ultra-wideband (UWB) radios is proposed in this paper. To realize dual band-notched characteristics at the TSA, we employ (a) a pair of nested C-shaped stubs beside the feed line and (b) a broadband microstrip-to-slot-line transition with an Archimedean spiral-shaped slot. The proposed antenna has been successfully simulated, implemented, and measured. An equivalent circuit model of the proposed antenna is also presented to discuss the mechanism of the dual band-notched TSA. The measured data for the optimized case show the bandwidth for the VSWR < 2 to be 9.2 GHz (from 2.4 to 11.6 GHz) with two notched bands of 3.1-4.0 GHz (WiMAX band) and 5.1-6.2 GHz (WLAN band), respectively. The measured electrical parameters of the proposed antenna and its radiation patterns show excellent performance with good pulse handling capabilities. Also, the 3.5/5.5 GHz dual band-notched characteristics are achieved without increasing the size of the single band-notched TSA reported previously.
2. Ma, T. G. and S. K. Jeng, "Planar miniature tapered-slot-fed annular slot antennas for ultrawide-band radios," IEEE Trans. on Antennas and Propag., Vol. 53, No. 3, 1194-1202, 2005.
3. Abbosh, A. M., "Miniaturized microstrip-fed tapered-slot antenna with ultrawideband performance," IEEE Antennas Wireless Propag. Lett., Vol. 8, 690-692, 2009.
4. Jolani, F., G. R. Dadashzadeh, M. Naser-Moghadasi, and A. M. Dadgarpour, "Design and optimization of compact balanced antipodal vivaldi antenna ," Progress In Electromagnetics Research C, Vol. 9, 183-192, 2009.
5. Yao, Y., M. Liu, W. Chen, and Z. Feng, "Analysis and design of wideband widescan planar tapered slot antenna array," IET Microw. Antennas Propag., Vol. 4, No. 10, 1632-1638, 2010.
6. Hamid, M. R., P. S. Hall, P. Gardner, and F. Ghanem, "Switched WLAN-wideband tapered slot antenna," Electron. Lett., Vol. 46, No. 1, 23-24, 2010.
7. Schantz, H. G. and Frequency, "Frequency notched UWB antennas," Proc. IEEE Ultra Wideband Sys. Tech. Conf., 214-218, 2003.
8. Kalteh, A. A., G. R. DadashZadeh, M. Naser-Moghadasi, and B. S. Virdee, "Ultra-wideband circular slot antenna with reconfigurable notch band function," IET Microw. Antennas Propag., Vol. 6, No. 1, 108-112, 2012..
9. Kim, C. B., J. S. Lim, J. S. Jang, Y. H. Jung, H. S. Lee, and M. S. Lee, "Design of the wideband notched compact UWB antenna," APMC 2007 (2007 Asia-Pacific Microwave Conference), 1-4, 2007.
10. Mehranpour, M., J. Nourinia, C. Ghobadi, and M. Ojaroudi, "Dual band notched square monopole antenna for ultrawideband applications ," IEEE Antennas Wireless Propag. Lett., Vol. 11, 172-175, 2012.
11. Lee, J.-H. and Y.-J. Sung, "Band-notched ultra-wideband antenna with asymmetric coupled-line for WLAN and X-band military satellite ," Journal of Electromagnetic Engineering and Science, Vol. 13, No. 1, 34-37, 2013.
12. Peng, L. and C. L. Ruan, "UWB band-notched monopole antenna design using electromagnetic-bandgap structures," IEEE Tran. on Microwave Theory and Tech., Vol. 59, No. 4, 1074-1081, 2011.
13. Peng, L. and C.-L. Ruan, "Design and time-domain analysis of compact multi-band-notched uwb antennas with EBG structures," Progress In Electromagnetics Research B, Vol. 47, 339-357, 2013.
14. Zhang, Y., W. Hong, C. Yu, Z. Q. Kuai, Y. D. Don, and J. Y. Zhou, "Planar ultrawideband antennas with multiple notched bands based on etched slots on the patch and/or split ring resonators on the feed line," IEEE Trans. on Antennas and Propag., Vol. 56, No. 9, 3063-3068, 2008.
15. Kim, D. O., N. I. Jo, D. M. Choi, and C. Y. Kim, "Design of the novel band notched UWB antenna with the spiral loop resonators," PIERS Online, Vol. 6, No. 2, 173-176, 2006.
16. Bao, X. L. and M. J. Ammann, "Printed UWB antenna with coupled slotted element for notch-frequency function," International Journal of Antennas and Propagation, 1-7, 2008.
17. Song, Y., Y.-C. Jiao, T.-L. Zhang, G. Zhao, and F.-S. Zhang, "Small tapered slot antenna with a band-notched function for wireless applications ," Progress In Electromagnetics Research Letters, Vol. 10, 97-105, 2009.
18. Zhu, F., S. Gao, A. T. S. Ho, R. A. Abd-Alhameed, C. H. See, J. Li, and J. Xu, "Miniaturized tapered slot antenna with signal rejection in 5--6-GHz band using a balun," IEEE Antennas Wireless Propag. Lett., Vol. 11, 507-510, 2012.
19. Yoon, I. J., H. Kim, H. K. Yoon, Y. J. Yoon, and Y. H. Kim, "Ultra-wideband tapered slot antenna with band cutoff characteristic ," Electron. Lett., Vol. 41, No. 11, 629-630, 2005.
20. Ma, T. G. and S. K. Jeng, "A planar tapered-slot-fed annular slot antenna with band-notched characteristics for ultra-wideband radios," IEICE Trans. Fundamentals, Vol. E88-A, No. 9, 2384-2386, 2005.
21. Zhu, F., S. Gao, A. T. S., Ho, R. A. Abd-Alhameed, C. H. See, J. Li, and J. Xu, "Dual band-notched tapered slot antenna using λ\4 band-stop filters," IET Microw. Antennas Propag., Vol. 6, No. 15, 1665-1673, 2012.
22. Lee, D. H., , H. Y. Yang, and Y. K. Cho, "Tapered slot antenna with band-notched function for ultrawideband radios," IEEE Antennas Wireless Propag. Lett., Vol. 5, 495-498, 2012.
23. Schuppert, B., "Microstrip/slotline transition: Modeling and experimental investigation," IEEE Trans. on Microwave Theory and Tech., Vol. 36, No. 8, 1272-1282, 1988.
24. Lin, C. C., P. Jin, and R. W. Ziolkowski, "Single, dual, and triband-notched ultrawideband (UWB) antennas using capacitively loaded loop (CLL) resonators," IEEE Trans. on Antennas and Propag., Vol. 60, No. 1, 102-109, 2012.
25. Antonino-Daviu, E., M. Cabedo-Fabres, M. Ferrando-Bataller and V. M. Rodrigo-Penarrocha, "Modal analysis and design of Antennas and Propag.,", Vol. 58, No. 5, 1457-1467, 2010.
26. Dissanayake, T. and K. P. Esselle, "Prediction of the notch frequency of slot loaded printed UWB antennas," IEEE Trans. on Antennas and Propag., Vol. 55, No. 11, 3320-33265, 2007.
27. Gupta, K. C., R. Garg, and I. J. Bahl, , Microstrip Lines and Slotlines, Artech House, Norwood, MA, 1979.
28. Pozar, D. M., "Microwave Engineering," John Wiley & Sons, Inc., 1998.
29. Das, N. K., "Generalized multiport reciprocity analysis of surface-to-surface transitions between multiple printed transmission lines," IEEE Tran. on Microwave Theory and Tech., Vol. 41, No. 6, 1164-1177, 1993.
30. Schmuckl, F. J., "The method of lines for the analysis of rectangular spiral inductors," IEEE Tran. on Microwave Theory and Tech., Vol. 54, No. 4, 1183-1186, 2006.