This paper aims to develop a new 3D analytical model devoted to the study of nonlinear transient magneto-thermal coupled problems in permanent magnet transverse flux induction heating device (PMTFIHD). Firstly, a 3D analytical solution of magneto-dynamic field problem taking into account the transverse edge effect in the workpiece is derived using variables' separation technique. This transverse edge effect allows determining the exact resulting heating power density, which is the heat source of the transient thermal problem in the work-piece. Secondly, the 3D transient analytical solution of the temperature distribution is obtained by combining variables' separation technique and Green's function method. Then, the previous models are exploited in a transient simulations procedure of the magneto-thermal process allowing the nonlinear physical properties of the part to be taking into account. Finally, the performances of the studied PMTFIHD will be calculated, in order to validate the developed 3D coupled models. The simulation results from the developed models are validated with those obtained by the finite element method and the experimental results.
2. Mach, F., V. Starman, P. Karban, I. Dolezel, and P. Kus, "Finite element 2D model of induction heating of rotating billets in system of permanent magnets and its experimental verification," IEEE Trans. Ind. Electron., Vol. 61, No. 5, 2584-2591, May 2014.
doi:10.1109/TIE.2013.2276025
3. Mach, F., P. Karban, and I. Dolezel, "Induction heating of cylindrical nonmagnetic ingots by rotation in static magnetic field generated by permanent magnets," Journal of Computational and Applied Mathematics, Vol. 236, No. 18, 4732-4744, ELSVIER, Dec. 2012.
doi:10.1016/j.cam.2012.02.035
4. Han, W., et al., "Commercial design and operating characteristics of a 300kW Superconducting Induction Heater (SIH) based on HTS magnets," IEEE Trans. Appl. Supercond., Vol. 29, No. 5, 1-5, Aug. 2019.
5. Choi, J., et al., "Design and performance evaluation of a multi-purpose HTS DC induction heating machine for industrial applications," IEEE Trans. Appl. Supercond., Vol. 25, No. 3, 1-5, Jun. 2015.
6. Lubin, T., D. Netter, J. Leveque, and A. Rezzoug, "Induction heating of aluminium billet subjected to a strong rotating magnetic field produced by superconducting windings," IEEE Trans. Magn., Vol. 45, No. 5, 2118-2127, May 2009.
doi:10.1109/TMAG.2009.2014461
7. Choi, J., C.-K. Lee, S. Cho, M. Park, I.-K. Yu, and M. Iwakuma, "Recent development and research activities of induction heater with high-TC superconducting magnets for commercialization," SN Appl. Sciences, Vol. 1, No. 1, 59-64, 2018.
doi:10.1007/s42452-018-0073-0
8. Abdi, A., Y. Ouazir, G. Barakat, and Y. Amara, "Permanent magnet linear induction heating device: Newtopology enhancing performances," COMPEL, Vol. 37, No. 5, 1755-1767(13), Oct. 2018.
doi:10.1108/COMPEL-01-2018-0026
9. Ammar, A., "2D hybrid magnetic model calculation in axisymmetric device," Progress In Electromagnetics Research Letters, Vol. 103, 15-23, 2022.
doi:10.2528/PIERL22010201
10. Fabbri, M., A. M. Forzan, S. Lupi, A. Morandi, and P. L. Ribani, "Experimental and numerical analysis of DC induction heating of aluminium billets," IEEE Trans. Magn., Vol. 45, No. 1, 192-200, Jan. 2009.
doi:10.1109/TMAG.2008.2005794
11. Runde, M., N. Magnusson, C. Fulbier, and C. Buhrer, "Commercial induction heaters with high temperature superconductor coils," IEEE Trans. Appl. Supercond., Vol. 21, No. 3, 1379-1383, 2011.
doi:10.1109/TASC.2010.2088095
12. Mach, F., P. Karban, I. Dolezel, P. Sima, Z. Jeliek, and , "Model of induction heating of rotating non-magnetic billets and its experimental verification," IEEE Trans. Magn., Vol. 50, No. 2, 309-312, Feb. 26, 2014.
doi:10.1109/TMAG.2013.2286497
13. Bensaidane, H., T. Lubin, S. Mezani, Y. Ouazir, and A. Rezzoug, "A new topology for induction heating system with PM excitation: Electromagnetic model and experimental validations," IEEE Trans. Magn., Vol. 51, No. 10, 3479-3487, Jun. 2015.
doi:10.1109/TMAG.2015.2442515
14. Qin, Z., H. Talleb, and Z. Ren, "A proper generalized decomposition-based solver for nonlinear magnetothermal problems," IEEE Trans. Magn., Vol. 52, No. 1, 1-11, Oct. 2016.
15. Moro, F. and L. Codecasa, "A 3-D hybrid cell method for induction heating problems," IEEE Trans. Magn., Vol. 53, No. 6, 1-4, Jun. 2017.
doi:10.1109/TMAG.2017.2659801
16. Ouazir, Y., A. Abdi, and H. Bensaidane, "2D analytical solution of transverse ux induction heating of the aluminum plates," 2012 XXth International Conference on Electrical Machines, 2733-2738, Marseille, France, Sep. 2012.
17. Fabbri, M., A. M. Forzan, S. Lupi, A. Morandi, and P. L. Ribani, "Experimental and numerical analysis of DC induction heating of aluminium billets," IEEE Trans. Magn., Vol. 45, No. 1, 192-200, Jan. 2009.
doi:10.1109/TMAG.2008.2005794
18. Aliferov, A., F. Dughiero, and M. Forzan, "Coupled magnetothermal FEM model of direct heating of ferromagnetic bended Tubes," IEEE Trans. Magn., Vol. 46, No. 8, 3217-3220, Jul. 19, 2010.
doi:10.1109/TMAG.2010.2046479
19. D'Angelo, L. A. M. and H. De Gersem, "Quasi-3D finite-element method for simulating cylindrical induction-heating devices," IEEE Trans. Magn., Vol. 2, 134-141, Aug. 2017.
20. Qin, Z., H. Talleb, and Z. Ren, "A proper generalized decomposition-based solver for nonlinear magnetothermal problems," IEEE Trans. Magn., Vol. 52, No. . 2, 1-9, Feb. 2016.
doi:10.1109/TMAG.2015.2492462
21. Ennassiri, H., G. Barakat, and Y. Amara, "Steady state hybrid thermal modelling of permanent magnet electrical machines," Proc. Int. Conf. Ecol. Vehicles Renew. Energies (EVER), 1-6, 2016.
22. Zhu, S., M. Cheng, and X. Cai, "Direct coupling method for coupled field-circuit thermal model of electrical machines," IEEE Trans. Magn., Vol. 33, No. 2, 473-482, Jun. 2018.
23. Nategh, S., O. Wallmark, M. Leksell, and S. Zhao, "Thermal analysis of a PMaSRM using partial FEA and lumped parameter modeling," IEEE Trans. Energy Convers., Vol. 27, No. 2, 477-488, Jun. 2012.
doi:10.1109/TEC.2012.2188295
24. Boughrara, K., F. Dubas, and R. Ibtiouen, "2-D exact analytical method for steady-state heat transfer prediction in rotating electrical machines," IEEE Trans. Magn., Vol. 54, No. 9, 1-19, Sept. 2018.
doi:10.1109/TMAG.2018.2851212
25. Abdi, A., Y. Ouazir, G. Barakat, and Y. Amara, "Transient quasi-3D magneto-thermal analytical solution in PM induction heating device," COMPEL | The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Vol. 39, No. 5, 1131-1144, 2020.
doi:10.1049/pi-a.1958.0036
26. Russell, R. L. and K. H. Norsworthy, "Eddy currents and wall losses inscreened-rotor induction motors," Proceedings of the IEE Part A: Power Engineering, Vol. 105, No. 20, 163, 1958.
doi:10.1109/20.376458
27. Decreux, P. and G. Nicolas, "Finite length effects study in massive iron rotors using 3D electromagnetic field computation," IEEE Trans. Magn., Vol. 31, No. 3, 2096-2099, May 1995.
doi:10.1109/TMAG.2011.2167347
28. De La Barriere, O., et al., "3-D formal resolution of Maxwell equations for the computation of the no load flux in an axial flux permanent magnet synchronous machine," IEEE Trans. Magn., Vol. 48, No. 1, 128-136, 2012.
doi:10.1109/TIE.2013.2279364
29. Pluk, K. J. W., T. A. van Beek, J. W. Jansen, and E. A. Lomonova, "Modeling and measurements on a finite rectangular conducting plate in an eddy current damper," IEEE Trans. Industrial Electronics, Vol. 61, No. 8, 4061-4072, Aug. 2014.
30. Paul, S., J. Wright, and J. Z. Bird, "3-D steady-state eddy current dampingand stiffness for a finite thickness conductive plate," IEEE Trans. Magn., Vol. 50, No. 11-6301404, Nov. 2014.
doi:10.1109/TMAG.2019.2950389
31. Jin, P., Y. Tian, Y. Lu, Y. Guo, G. Lei, and J. Zhu, "3-D analytical magnetic field analysis of the eddy current coupling with halbach magnets," IEEE Trans. Magn., Vol. 56, No. 1, 1-4, Jan. 2020.
doi:10.1109/TMAG.2015.2455955
32. Lubin, T. and A. Rezzoug, "3-D analytical model for axial- ux eddy-current couplings and brakes under steady-state conditions," IEEE Trans. Magn., Vol. 51, No. 10, 1-12, Oct. 2015.
33. Diriye, A., Y. Amara, and G. Barakat, "Three-dimensional modeling of permanents magnets synchronous machines using a 3D reluctance network," 2018 XIII International Conference on Electrical Machines (ICEM), 2304-2310, Alexandroupoli, Greece, Sep. 2018.
34. Jin, P., Y. Yuan, J. Minyi, F. Shuhua, L. Heyun, H. Yang, and S. L. Ho, "3-D analytical magnetic field analysis of axial flux permanent magnet machine," IEEE Trans. Magn., Vol. 50, No. 11, 8103504, Nov. 2014.
doi:10.1109/TMAG.2019.2953110
35. Sahu, R., P. Pellerey, and K. Laskaris, "Eddy current loss model unifying the effects of reaction field and non-homogeneous 3-D magnetic field," IEEE Trans. Magn., Vol. 56, No. 2, 1-4, Jan. 13, 2020.
doi:10.2528/PIERB16051908
36. Sun, X., S. Luo, L. Chen, R. Zhao, and Z. Yang, "Suspension force modeling and electromagnetic characteristics analysis of an interior bearingless permanent magnet synchronous motor," Progress In Electromagnetics Research B, Vol. 69, 31-45, 2016.
doi:10.2528/PIERB14100902
37. Verez, G., G. Barakat, and Y. Amara, "Influence of slots and rotor poles combinations on noise and vibrations of magnetic origins in `U'-core flux-switching permanent magnet machines," Progress In Electromagnetics Research B, Vol. 61, 149-168, 2014.
Submit
