To meet the requirements for broadband operation, high port-to-port isolation, and miniature chip area, a doubly balanced monolithic microwave ring mixer with an advanced IF extraction fabricated using 0.15 μm GaAs pHEMT process is presented. A miniature Marchand-like spiral balun with low-pass filter is used to extract IF signals and maintain balun performance simultaneously. The low-pass filter can filter out both the RF and LO signals. This miniaturized mixer design can mitigate layout complexity, improve port-to-port isolations suitable for ultra-broadband Ku-, K-, and Ka-band applications. Subsequently, the LO/RF-to-IF isolations are greater than 43.2 and 32 dB from 11 to 40 GHz, respectively. The LO-to-RF isolation is between 26.9 and 50.7 dB within the same swept range. The conversion loss is 7.2-12.4 dB within the operating bandwidth.
2. Chen, T. H. , K. W. Chang, S. B. T. Bui, L. C. T. Liu, G. S. Dow, and S. Pak, "Broadband single- and double-balanced resistive HEMT monolithic mixers," IEEE Trans. Microw. Theory Tech., Vol. 43, No. 3, 477-484, Mar. 1995.
doi:10.1109/22.372088
3. Geffroy, V. , G. D. Astis, and E. Bergeault, "RF mixers using standard digital CMOS 0.35 ¹m process," IEEE MTT-S Int. Microw. Symp. Dig., 83-86, 2001.
4. Jeong, J. C., I. B. Yom, and K. W. Yeom, "An active IF balun for a doubly balanced resistive mixer," IEEE Microw. Wireless Compon. Lett., Vol. 19, No. 4, 224-226, Apr. 2009.
doi:10.1109/LMWC.2009.2015503
5. Yu, M. , R. H. Walden, A. E. Schmitz, and M. Lui, "Ka/Q-band doubly balanced MMIC mixers with low LO power," IEEE Microw. Guided Wave Lett., Vol. 10, No. 10, 424-426, Oct. 2000.
doi:10.1109/75.877233
6. Yang, T. Y. and H. K. Chiou, "A 16-46 GHz mixer using broadband multilayer balun in 0.18-μm CMOS technology," IEEE Microw. Wireless Compon. Lett., Vol. 7, No. 7, 534-536, Jul. 2007.
7. Chen, J. H. , C. C. Kuo, Y. M. Hsin, and H. Wang, "A 15-50 GHz broadband resistive FET ring mixer using 0.18-μm CMOS technology," lEEE MTT-S Int. Dig., 784-787, 2010.
8. Pavio, A. M. , R. H. Halladay, S. D. Bingham, and C. A. Sapashe, "Broadband monolithic single and double ring active/passive mixers," IEEE Microwave and Millimeter-Wave Monolithic Circuits Symp., 71-74, 1988.
9. Yoon, Y. J., Y. Lu, R. C. Frye, and P. R. Smith, "Modeling of monolithic RF spiral transmission-line balun," IEEE Trans. Microw. Theory Tech., Vol. 49, No. 2, 393-395, Feb. 2001.
doi:10.1109/22.903105
10. Ang, K. S., S. B. Economides, S. Nam, and I. D. Robertson, "A compactMMIC balun using spiral transformers," Asia-Pacific Microw. Conf., 655-658.
11. Chuang, H. C., C. M. Lin, C. H. Lin, and Y. H. Wang, "A K-to Ka-Band broadband doubly balanced monolithic ring mixer," IEEE Microw. Wireless Compon. Lett., Vol. 18, No. 6, 401-403, Jun. 2008.
doi:10.1109/LMWC.2008.922648
12. Lin , C. M. , H. K. Lin, C. F. Lin, Y. A. Lai, C. H. Lin, and Y. H. Wang, "A 16{44 GHz compact doubly balanced monolithic ring mixer," IEEE Microw. Wireless Compon. Lett., Vol. 18, No. 9, 620-622, Sep. 2008.
doi:10.1109/LMWC.2008.2002464
13. Lin, C. M., C. H. Lin, J. C. Chiu, and Y. H. Wang, "An ultra-broadband doubly balanced monolithic ring mixer for Ku- to Ka-band applications," IEEE Microw. Wireless Compon. Lett., Vol. 17, No. 10, 733-735, Oct. 2007.
doi:10.1109/LMWC.2007.905639
14. Mongia, R. , I. Bahl, and P. Bhartia, RF and Microwave Coupled-Line Circuits, 136 -137, Artech House, Norwood, MA, 1999.
15. Ang, K. S. and I. D. Robertson, "Analysis and design of impedance-transforming planar Marchand baluns," IEEE Trans. Microw. Theory Tech., Vol. 49, No. 2, 402-406.
Submit
