Microwave oven generates a harmful electromagnetic wave at 2.45 GHz of 1000 Watts. The generated microwave is confined within the cavity of the oven for efficient heating and secured operation. To prevent microwave leakage through the front glass door, a special construction of Faraday Cage is involved. In this paper, Faraday Cage is replaced with Transparent Frequency Selective Surface Front Door, which provides better visibility and avoids microwave energy to escape from the oven. Two works are proposed in this paper. The first one is band pass response which has been achieved for 10 GHz by printing array of Greek cross aperture (FSS) on the front glass door, and the second work is band stop response which has been achieved for 2.4 GHz frequency by printing the array of circular ring patch (FSS) on the front glass door. Design of two different FSS arrays and the simulation results were discussed.
2. Chiu, C.-N., C.-H. Kuo, and M.-S. Lin, "Bandpass shielding enclosure design using multipole-slot arrays for modern portable digital devices," IEEE Transactions on Electromagnetic Compatibility, Vol. 50, No. 4, Nov. 2008.
3. Taylor, P. S., "An active annular ring frequency selective surface," IEEE Transactions on Antennas and Propagation, Vol. 59, No. 9, 3265-3271, Sep. 2011.
doi:10.1109/TAP.2011.2161555
4. Raspopoulos, M., "Frequency selective buildings through frequency selective surfaces," IEEE Transactions on Antennas and Propagation, Vol. 59, No. 8, 2998-3005, Aug. 2011.
doi:10.1109/TAP.2011.2158779
5. Mias, C., C. Tsakonas, and C. Oswald, "An investigation into the feasibility of designing frequency selective windows employing periodic structures, (Ref. AY3922),", Tech. Rep., Final Report for the Radio-communications Agency, Nottingham Trent University, 2001.
6. Yao, X., "Equivalent circuit method for analyzing frequency selective surface with ring patch in oblique angles of incidence," IEEE Antennas and Wireless Propagation Letters, Vol. 10, 820-823, 2011.
7. Karlsson, A., "Frequency selective structures with stochastic deviations,", Electromagnetic Theory Lund Institute of Technology, 2003.
8. Fallahi, A., "Analysis and optimization of frequency selective surfaces with inhomogeneous, periodic substrates," Optomechatronic Micro/Nano Devices and Components III, edited by Lixin Dong, Yoshitada Katagiri, Eiji Higurashi, Hiroshi Toshiyoshi, Yves-Alain Peter, Proceedings of SPIE, Vol. 6717, 67170N, 2007.
9. Widenberg, B., "Design of energy saving windows with high transmission at 900 MHz and 1800 MHz,", Electromagnetic Theory Lund Institute of Technology, 2002.
10. Widenberg, B., A. Karlsson, and G. Kristensson, "Dissipation in thick frequency selective structures,", 2000.
Submit
