A novel planar dual-band microstrip power divider is proposed in this paper. The circuit is composed of two sections of transmission line, short-circuited stub line and planar resistor, which can provide high isolation and good amplitude balance simultaneously at two frequencies. The closed-form equations are derived,and the design procedures of dual-band power divider are given. To Certify the validity, a proposed power divider was fabricated and measured at 950 MHz and 2200 MHz which might be applied to M and CDMA systems. Both theoretical and simulated results are given, which are in good agreement with the measured results.
2. Lin, L. and W. Ke, "Integrated planar spatial power combiner," IEEE Transactions on Microwave Theory and Techniques, Vol. 54, No. 4, 1470-1476, 2006.
doi:10.1109/TMTT.2006.871360
3. Rosloniec, S., "Three-port hybrid power dividers terminated in complex frequency-dependent impedances," IEEE Transactions on Microwave Theory and Techniques, Vol. 44, No. 8, 1490-1493, 1996.
doi:10.1109/22.536034
4. Srisathit, S., M. Chongcheawchamnan, and A. Worapishet, "Design and realisation of dual-band 3 dB power divider based on two-section transmission-line topology," Electronics Letters, Vol. 39, No. 9, 723-724, 2003.
doi:10.1049/el:20030483
5. Wu, L., et al., "A dual-frequency wilkinson power divider," IEEE Transactions on Microwave Theory and Techniques, Vol. 54, No. 1, 278-284, 2006.
doi:10.1109/TMTT.2005.860300
6. Tang, X. and K. Mouthaan, "Compact dual-band power divider with single allpass coupled lines sections," Electronics Letters, Vol. 46, No. 10, 688-689, 2010.
doi:10.1049/el.2010.3579
7. Wang, X., et al., "A generalized dual-band Wilkinson power divider with parallel L, C, and R components," IEEE Transactions on Microwave Theory and Techniques, Vol. 60, No. 4, 952-964, 2012.
doi:10.1109/TMTT.2012.2184298
8. Gao, N., G. Wu, and Q. Tang, "Design of a novel compact dual-band Wilkinson power divider with wide frequency ratio," IEEE Microwave and Wireless Components Letters, Vol. 24, No. 2, 81-83, 2014.
doi:10.1109/LMWC.2013.2290226
9. Zhang, T., et al., "A compact four-way dual-band power divider using lumped elements," IEEE Microwave and Wireless Components Letters, Vol. 25, No. 2, 94-96, 2015.
doi:10.1109/LMWC.2014.2382681
10. Park, M. J. and B. Lee, "Wilkinson power divider with extended ports for dual-band operation," Electronics Letters, Vol. 44, No. 15, 916-917, 2008.
doi:10.1049/el:20080821
11. Li, X., S.-X. Gong, L. Yang, and Y.-J. Yang, "A novel Wilkinson power divider for dual-band operation," Journal of Electromagnetic Waves and Applications, Vol. 23, No. 2-3, 395-404, 2009.
doi:10.1163/156939309787604346
12. Wu, Y., Y. Liu, and S. Li, "Dual-band modified Wilkinson power divider without transmission line stubs and reactive components," Progress In Electromagnetics Research, Vol. 96, 9-20, 2009.
doi:10.2528/PIER09072109
13. Wang, X. H., L. Chen, X.-W. Shi, Y.-F. Bai, L. Chen, and X.-Q. Chen, "Planar dual-frequency power divider using umbrella-shaped resonator," Journal of Electromagnetic Waves and Applications, Vol. 24, No. 5-6, 597-606, 2010.
doi:10.1163/156939310791036377
14. Li, J., Y.Wu, Y. Liu, J.-Y. Shen, S. Li, and C. Yu, "A generalized coupled-line dual-bandWilkinson power divider with extended ports," Progress In Electromagnetics Research, Vol. 129, 197-214, 2012.
doi:10.2528/PIER12050908
15. Wang, X. H., L. Zhang, Y. Xu, Y. F. Bai, C. Liu, and X.-W. Shi, "A tri-band impedance transformer using stubbed coupling line," Progress In Electromagnetics Research, Vol. 141, 33-45, 2013.
doi:10.2528/PIER13042907
16. Park, M.-J., "Two-section cascaded coupled line Wilkinson power divider for dual-band applications," IEEE Microwave and Wireless Components Letters, Vol. 19, No. 4, 188-190, 2009.
doi:10.1109/LMWC.2009.2015482
17. Wang, X. H., et al., "A novel planar three-way triband power divider," Microwave and Optical Technology Letters, Vol. 52, No. 1, 182-184, 2010.
doi:10.1002/mop.24858
18. Wu, Y., Y. Liu, and Q. Xue, "An analytical approach for a novel coupled-line dual-band Wilkinson power divider," IEEE Transactions on Microwave Theory and Techniques, Vol. 59, No. 2, 286-294, 2011.
doi:10.1109/TMTT.2010.2084096
19. Bai, Y. F., et al., "Design of compact quad-frequency impedance transformer using two-section coupled line," IEEE Transactions on Microwave Theory and Techniques, Vol. 60, No. 8, 2417-2423, 2012.
doi:10.1109/TMTT.2012.2202682
20. Wu, Y., et al., "Analytical design method of multiway dual-band planar power dividers with arbitrary power division," IEEE Transactions on Microwave Theory and Techniques, Vol. 58, No. 12, 3832-3841, 2010.
21. Cheng, K. K. M. and C. Law, "A novel approach to the design and implementation of dual-band power divider," IEEE Transactions on Microwave Theory and Techniques, Vol. 56, No. 2, 487-492, 2008.
doi:10.1109/TMTT.2007.914629
22. Bai, Y. F., et al., "Compact dual-band power divider using non-uniform transmission line," Electronics Letters, Vol. 47, No. 3, 188-190, 2011.
doi:10.1049/el.2010.3238
Submit
