Vol. 89

Latest Volume
All Volumes
All Issues
2020-01-20

A Compact Flexible Printed Monopole Antenna with Embedded Periodic h -Shaped Slots for WLAN Applications

By Honglin Zhang, Dong Chen, Chunlan Zhao, Kan Wang, and Ying Yu
Progress In Electromagnetics Research Letters, Vol. 89, 61-67, 2020
doi:10.2528/PIERL19120402

Abstract

In this paper, a compact printed monopole antenna with periodic H-shaped slots for WLAN application is proposed, designed and fabricated with standard flexible printed circuit board process. By cutting four H-shaped slots in the radiation patch of the printed monopole antenna, the resonant frequency of the monopole antenna can be reduced; therefore, a compact antenna is realized. The radiator size of the antenna is 0.07λg×0.19λg, which is much smaller than that of a traditional printed monopole antenna. By utilizing electromagnetic simulation software CST, the antenna is simulated and optimized. Moreover, the performance of the proposed antenna is discussed taking into consideration the possible effects of deformations due to the flexibility of the substrate. A sample antenna is manufactured and measured to prove the predicted performance of our proposed antenna. The measured results agree well with the simulations. Hence, the proposed method in this paper is a promising candidate for the design of compact antennas.

Citation


Honglin Zhang, Dong Chen, Chunlan Zhao, Kan Wang, and Ying Yu, "A Compact Flexible Printed Monopole Antenna with Embedded Periodic h -Shaped Slots for WLAN Applications," Progress In Electromagnetics Research Letters, Vol. 89, 61-67, 2020.
doi:10.2528/PIERL19120402
http://test.jpier.org/PIERL/pier.php?paper=19120402

References


    1. Croq, F., et al., "Stacked slot-coupled printed antenna," IEEE Microwave Guided Wave Lett., Vol. 1, No. 10, 288-290, Oct. 1991.
    doi:10.1109/75.89098

    2. Jiao, J. J., et al., "Compact antenna element for highresolution SAR polarimetry applications," Electron. Lett., Vol. 49, No. 25, 1586-1588, Dec. 2013.
    doi:10.1049/el.2013.2542

    3. Guo, J., W. Feng, J.-M. Friedt, Q. Zhao, and M. Sato, "A half-cut compact monopole antenna for SFCW radar-based concrete wall monitoring with a passive cooperative target," IEEE Geoscience and Remote Sensing Letters, 1-5, Sep. 2019.

    4. Ellis, M. S., et al., "Miniaturised printed monopole antenna with a linked ground plane and radiator," Electron. Lett., Vol. 54, No. 11, 676-678, Jun. 2018.
    doi:10.1049/el.2018.0756

    5. Tang, M.-C., et al., "Pattern reconfigurable, vertically polarized, low-profile, compact, near-field resonant parasitic antenna," IEEE Trans. Antennas Propag., Vol. 67, No. 3, 1467-1475, Nov. 2018.
    doi:10.1109/TAP.2018.2883635

    6. Sun, B., et al., "Compact monopole antenna for GSM/DCS operation of mobile handsets," Electron. Lett., Vol. 39, No. 22, 1562-1563, Nov. 2003.
    doi:10.1049/el:20031012

    7. Teng, P. L., et al., "Planar monopole folded into a compact structure for very low profile multiband mobile phone antenna," Microw. Opt. Technol. Lett., Vol. 33, No. 1, 22-25, Apr. 2002.
    doi:10.1002/mop.10219

    8. Lin, S. Y., et al., "Multiband folded planar monopole antenna for mobile handset," IEEE Trans. Antennas Propag., Vol. 52, No. 7, 1790-1794, Jul. 2004.
    doi:10.1109/TAP.2004.831315

    9. Liu, W. C., et al., "A compact CPW-fed slotted patch antenna for dual-band operation," IEEE Antennas Wireless Propag. Lett., Vol. 9, 110-113, Feb. 2010.
    doi:10.1109/LAWP.2010.2044135

    10. Liu, P., et al., "Compact CPW-fed tri-band printed antenna with meandering split-ring slot for WLAN/WiMAX applications," IEEE Antennas Wireless Propag. Lett., Vol. 11, 1242-1244, Oct. 2012.

    11. Huang, C.-Y., et al., "A slot-monopole antenna for dual-band WLAN applications," IEEE Antennas Wireless Propag. Lett., Vol. 10, 500-502, May 2011.
    doi:10.1109/LAWP.2011.2156755

    12. Dang, L., et al., "A compact microstrip slot tripleband antenna for WLAN/WiMAX applications," IEEE Antennas Wireless Propag. Lett., Vol. 9, 1178-11181, Dec. 2010.
    doi:10.1109/LAWP.2010.2098433

    13. Hu, W., et al., "Compact triband square slot antenna with symmetrical L-strips for WLAN/WiMAX applications," IEEE Antennas Wireless Propag. Lett., Vol. 10, 462-465, May 2011.
    doi:10.1109/LAWP.2011.2154372

    14. Chen, I. F., et al., "Multi-foled tapered monopole antenna for wideband mobile handset applications," Electron. Lett., Vol. 40, No. 10, 577-578, May 2004.
    doi:10.1049/el:20040405

    15. Sun, M., et al., "Miniaturization of planar monopole antenna for ultrawideband radios," IEEE Trans. Antennas Propag., Vol. 58, No. 7, 2420-2425, Jul. 2010.
    doi:10.1109/TAP.2010.2048851

    16. Zhai, H. Q., et al., "A compact printed antenna for triple-band WLAN/WiMAX applications," IEEE Antennas Wireless Propag. Lett., Vol. 12, 65-68, Jan. 2013.
    doi:10.1109/LAWP.2013.2238881

    17. Xu, Y., et al., "Compact CPW fed printed monopole antenna triple band characteridtics for WLAN/WiMAX applications," Electron. Lett., Vol. 48, No. 24, 1519-1520, Nov. 2012.
    doi:10.1049/el.2012.3255

    18. Huang, H., et al., "Multiband metamaterial loaded monopole antenna forWLAN/WiMAX applicatios," IEEE Antennas Wireless Propag. Lett., Vol. 14, 662-665, Dec. 2014.

    19. Abdalla, M. A., et al., "Compact and closely spaced metamaterial MIMO antenna with high isolation for wireless applications," IEEE Antennas Wireless Propag. Lett., Vol. 12, 1452-1455, Nov. 2013.

    20. Ketzaki, D. A., et al., "Metamaterial-based design of planar compact MIMO monopole," IEEE Trans. Antennas Propag., Vol. 61, No. 5, 2758-2766, Jan. 2013.
    doi:10.1109/TAP.2013.2243813

    21. Lai, A., et al., "Infinite wavelength resonant antennas with monopole radiation pattern based on periodic structures," IEEE Trans. Antennas Propag., Vol. 55, No. 3, 868-876, Mar. 2007.
    doi:10.1109/TAP.2007.891845

    22. Ntaikos, D. K., et al., "Metamaterial based electrically small multiband planar monopole antenna," IEEE Antennas Wireless Propag. Lett., Vol. 10, 963-966, Sep. 2011.
    doi:10.1109/LAWP.2011.2167309