Vol. 101

Latest Volume
All Volumes
All Issues
2021-12-06

Design of Polarization Insensitive Frequency Selective Surface for Electromagnetic Shielding Application

By Surya Durga Padmaja Bikkuri and Bhavan S. Naga Kishore
Progress In Electromagnetics Research Letters, Vol. 101, 71-78, 2021
doi:10.2528/PIERL21091506

Abstract

In this paper, a low profile Frequency Selective Surface is presented, for obtaining electromagnetic shielding in four distinct frequency regions. The designed structure consists of three rectangular strips Resonators, Jerusalem cross in the top side and diagonal metallic strips on bottom side of the dielectric. The proposed structure provides electromagnetic shielding at 9.9 GHz, 12.3 GHz, 13.5 GHz, and 16.4 GHz frequency regions. Besides these frequency regions, we also obtain five transparent windows suitable for telemetry application. The prototype of the proposed structure is fabricated. It is observed that the measured results are nearly similar to simulated results because of minor fabrication errors. Furthermore the proposed low profile structure can be deployed for applications like radoms, spatial filters, antenna reflectors and RCS reductions.

Citation


Surya Durga Padmaja Bikkuri and Bhavan S. Naga Kishore, "Design of Polarization Insensitive Frequency Selective Surface for Electromagnetic Shielding Application," Progress In Electromagnetics Research Letters, Vol. 101, 71-78, 2021.
doi:10.2528/PIERL21091506
http://test.jpier.org/PIERL/pier.php?paper=21091506

References


    1. Chen, H. Y. and Y. Tao, "Bandwidth enhancement of a U-slot patch antenna using dual- band frequency-selective surface with double rectangular ring elements," Microwave and Optical Technology Letters, Vol. 53, No. 7, 1547-1553, 2011.
    doi:10.1002/mop.26066

    2. Ghosh, S. and K. V. Srivastava, "Broadband polarization-insensitive tunable frequency selective surface for wideband shielding," IEEE Transactions on Electromagnetic Compatibility, Vol. 60, No. 1, 166-172, 2017.
    doi:10.1109/TEMC.2017.2706359

    3. Li, J., Q. Zeng, R. Liu, and T. A. Denidni, "A compact dual-band beam-sweeping antenna based on active frequency selective surfaces," IEEE Transactions on Antennas and Propagation, Vol. 65, No. 4, 1542-1549, 2017.
    doi:10.1109/TAP.2017.2669719

    4. Sen, G., T. Mandal, S. Majumdar, S. Mahato, S. Mondal, and P. P. Sarkar, "Design of a wide band Frequency Selective Surface (FSS) for multiband operation of reflector antenna," 5th International Conference on Computers and Devices for Communication (CODEC), 1-3, December 2012.

    5. Romeu, J. and Y. R. Samii, "Fractal FSS: A novel dual-band frequency selective surface," IEEE Transactions on Antennas and Propagation, Vol. 48, No. 7, 1097-1105, 2000.
    doi:10.1109/8.876329

    6. Liu, N., X. Sheng, C. Zhang, and D. Guo, "Design of frequency selective surface structure with high angular stability for radome application," IEEE Antennas and Wireless Propagation Letters, Vol. 17, No. 1, 138-141, 2017.
    doi:10.1109/LAWP.2017.2778078

    7. Jin, C., Q. Lv, B. Zhang, J. Liu, S. An, Z. S. He, and Z. Shen, "Ultra-wide-angle bandpass frequency selective surface," IEEE Transactions on Antennas and Propagation, Vol. 69, No. 9, 5673-5681, 2021.
    doi:10.1109/TAP.2021.3061144

    8. Kundu, S., "A compact uniplanar ultra-wideband frequency selective surface for antenna gain improvement and ground penetrating radar application," International Journal of RF and Microwave Computer-Aided Engineering, Vol. 30, No. 10, e22363, 2020.
    doi:10.1002/mmce.22363

    9. Bhattacharya, A., B. Dasgupta, and R. Jyoti, "Design and analysis of ultrathin X-band frequency selective surface structure for gain enhancement of hybrid antenna," International Journal of RF and Microwave Computer-Aided Engineering, Vol. 31, No. 2, e22505, 2021.
    doi:10.1002/mmce.22505

    10. Das, P., K. Mandal, and A. Lalbakhsh, "Single-layer polarization-insensitive frequency selective surface for beam recon gurability of monopole antennas," Journal of Electromagnetic Waves and Applications, Vol. 34, No. 1, 86-102, 2020.
    doi:10.1080/09205071.2019.1688693

    11. Sivasamy, R., M. Kanagasabai, S. Baisakhiya, R. Natarajan, J. K. Pakkathillam, and P. S. Kumar, "A novel shield for GSM 1800MHz band using frequency selective surface," Progress In Electromagnetics Research Letters, Vol. 38, 193-199, 2013.
    doi:10.2528/PIERL13022206

    12. Yu, Z. and C. Wang, "Bandpass frequency selective surface based on square waveguide structure using 3D printing technology," Progress In Electromagnetics Research M, Vol. 99, 165-175, 2021.
    doi:10.2528/PIERM20080803

    13. Bilal, M., R. Saleem, Q. H. Abbasi, B. Kasi, and M. F. Shaque, "Miniaturized and Flexible FSS-based EM shields for conformal applications," IEEE Transactions on Electromagnetic Compatibility, Vol. 62, No. 5, 1703-1710, 2020.
    doi:10.1109/TEMC.2019.2961891

    14. Ghosh, J. and D. Mitra, "Restoration of antenna performance in the vicinity of metallic cylinder in implantable scenario," IET Microwaves, Antennas & Propagation, Vol. 14, No. 12, 1440-1445, 2020.
    doi:10.1049/iet-map.2019.0519

    15. Lee, I. G. and I. P. Hong, "3D frequency selective surface for stable angle of incidence," Electronics Letters, Vol. 50, No. 6, 423-424, 2014.
    doi:10.1049/el.2014.0053

    16. Zheng, G., C. Zhong, L. Tang, P. Luo, and Y. Wang, "Study on ultra-wide stopband miniaturized multilayer frequency selective surface with capacitive loading," Progress In Electromagnetics Research Letters, Vol. 94, 117-123, 2020.
    doi:10.2528/PIERL19111201

    17. Shaik, V. and K. Shambavi, "Design of dodecagon unit cell shape based three layered frequency selective surfaces for X band reflection," Progress In Electromagnetics Research M, Vol. 75, 103-111, 2018.
    doi:10.2528/PIERM18070207

    18. Yin, W., H. Zhang, T. Zhong, and X. Min, "A novel compact dual-band frequency selective surface for GSM shielding by utilizing a 2.5-dimensional structure," IEEE Transactions on Electromagnetic Compatibility, Vol. 60, No. 6, 2057-2060, 2018.
    doi:10.1109/TEMC.2018.2790584

    19. Fallah, M., A. Ghayekhloo, and A. Abdolali, "Design of frequency selective band stop shield using analytical method," Journal of Microwaves, Optoelectronics and Electromagnetic Applications, Vol. 14, No. 2, 217-228, 2015.
    doi:10.1590/2179-10742015v14i2536

    20. Shaik, V. and K. Shambavi, "An ultra-thin non-resonant class of frequency selective surface for X band applications," Progress In Electromagnetics Research M, Vol. 96, 9-20, 2020.
    doi:10.2528/PIERM20062501

    21. Syed, I. S., Y. Ranga, L. Matekovits, K. P. Esselle, and S. G. Hay, "A single-layer frequency-selective surface for ultrawideband electromagnetic shielding," IEEE Transactions on Electromagnetic Compatibility, Vol. 56, No. 6, 1404-1411, 2014.
    doi:10.1109/TEMC.2014.2316288

    22. Da Silva Segundo, F. C. G. and A. L. P. S. Campos, "Compact frequency selective surface with dual band response for WLAN applications," Microwave and Optical Technology Letters, Vol. 57, No. 2, 265-268, 2015.
    doi:10.1002/mop.28830

    23. Sohail, S. I., "Wi-Fi transmission and multi-band shielding using single-layer frequency selective surface," IEEE International Symposium on Antennas and Propagation (APSURSI), 963-964, June 2016.
    doi:10.1109/APS.2016.7696190

    24. Paul, G. S., K. Mandal, and A. Lalbakhsh, "Single-layer ultra-wide stop-band frequency selective surface using interconnected square rings," AEU-International Journal of Electronics and Communications, Vol. 132, 153630, 2021.
    doi:10.1016/j.aeue.2021.153630

    25. Abbasi, S., J. Nourinia, C. Ghobadi, M. Karamirad, and B. Mohammadi, "A sub-wavelength polarization sensitive band-stop FSS with wide angular response for X-and Ku-bands," AEU- International Journal of Electronics and Communications, Vol. 89, 85-91, 2018.
    doi:10.1016/j.aeue.2018.03.018